Specifications - Art Project Series User Manual

SPECIFICATIONS

Input Connections
Input Impedance
Output Connections
Output Impedance
Frequency Response
Maximum Gain
THD
CMRR
Equivalent Input Noise
Maximum Input Level
Max Output Level
Phantom Power
Tube Type
Compressor Slope
Attack Time
Release Time
Low Cut Filter
Chassis Type
Power Requirements
Input
Output
Dimensions (HWD)
Weight
XLR balanced or ¼-inch unbalanced
1M Ohms ¼-inch input, 5K Ohms XLR input
¼-inch unbalanced
XLR balanced, transformer isolated.
XLR: < 600 Ohms, ¼-inch: < 300 Ohms
30 Hz – 60 kHz +1 dB balanced output, 20Hz-60kHz +1dB ¼-inch output
+80 dB (balanced in-out), +64dB (unbalanced input, balanced output)
<0.1% @ 1k Hz
>60 dB @ max gain
-128 dBu typical ("A" wtd., Shorted XLR balanced input, gain @ max)
unbalanced (Inst): +15 dBu, balanced (mic): +10dBu
+19dBu (Line mode)
Switch selectable, +48Volts DC, filtered, current limited
Hand selected 12AX7a
2:1 (Comp.) / 11:1 (Limit)
<1mSec (limit), 20mSec (comp.)
150mSec (Fast), 20mSec – 3 Sec Program dependent (Auto)
-3dB @ 70Hz, 6dB/Octave
All aluminum black anodized with integral rubber sides
100-240V AC~50/60Hz
12V DC @ ≥ 800mA
1.75-inch x 5.9-inch x 6.5-inch (44.5mm x 150mm x 165mm)
2.9 lbs. (1.32 kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement.
Therefore, specifications are subject to change without notice.
14