Rear Panel Connections; Inputs; ¼" Input Jacks; Euroblock Barrier Strips - Art SLA-4 User Manual

REAR PANEL CONNECTIONS

It is easy to interface the SLA-4 with a wide variety of equipment. All inputs
and outputs are located on the rear panel. Standard ¼" and Euroblock
inputs and binding post outputs make patching simple.

INPUTS

The SLA-4 has two styles of input connections: ¼" TRS and Euroblock.
Use these connections to connect the output signal from a mixer,
preamplifier, crossover, or EQ to the amplifier. Balanced connections
are recommended for cable runs longer than 20 feet. For cable runs
under 20 feet, the unbalanced connections can be used.
You may also use the two different types of input connections to jump
a parallel connection to another amp. For example: connect a ¼" cable
to the input of channel one, and then connect from the Euroblock
connections to another amplifier channel input.
¼" INPUT JACKS
The ¼" Input jacks are wired as follows: Tip is positive, Ring is
negative, and Sleeve is ground. This connection can be used for both
balanced and unbalanced connections.

EUROBLOCK BARRIER STRIPS

Insert wires into the barrier strip, and then snug down with the
setscrew. Each barrier strip can be removed for quick service without
disconnecting the individual wires.
10