Specifications - Art USB DUAL PRE PROJECT SERIES User Manual

SPECIFICATIONS:

Frequency Response:
THD:
CMRR:
Channel Separation:
Signal to Noise Ratio:
Equivalent Input Noise:
Input Impedance:
Output Impedance:
Maximum Signal Level:
Maximum Gain:
Phantom Power:
Input Connections:
Output Connection:
A/D-D/A:
Computer Interface:
Chassis Type:
Power Requirements:
Dimensions:
Weight:
Therefore, specifications are subject to change without notice.
Go to www.artproaudio.com
20 Hz – 20 kHz (+0, -1 dB)
<0.01% @ 1 kHz
>60 dB
>75 dB
>90 dB (Ref 0 dBu)
-120 dBu typical (XLR balanced, gain @ maximum)
>300k Ohms 1/4-inch input, >4k Ohms XLR input
600 Ohms (balanced 1/4-inch), 50 Ohms (headphone 1/8-inch)
+6 dBu in, +10 dBu out (balanced), +4 dBu out (single ended)
+48 dB (balanced in-out)
Switch selectable, +48Volts DC, filtered, current limited
XLR / 1/4-inch TRS "Combo" jack balanced or unbalanced
1/4-inch TRS balanced, 1/8-inch TRS headphone mini jack
16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer
0.4 ms A/D latency @ 44.1 kHz
USB 1.1 compliant, Windows 98SE/ME/2000/XP/Vista32bit,
Apple OS9.1/OSX computers with native USB support
All aluminum black anodized with integral rubber sides
7.5-12V AC or DC @ <150mA (external) or USB bus powered
or 9V Battery @ 20mA typical, 50mA max. (phantom power)
1.75inch H x 4.6inch W x 4.7inch D (44.5mm x 117mm x 119mm)
1.3 lbs. (0.59 kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement.
for the latest information and support on the USB Dual Pre.
11