Plumbing Preparations - treesse Fusion Spa 200 Preinstallation Manual

Pre-Installation
5

PLUMBING PREPARATIONS

The water connection must be dedicated exclusively to the minipool (it is not possible to connect other equipment
to the same connection) and carried out with new and never used hoses and couplings.
It is recommended to use ONLY tap water as it guarantees microbiological purity and absence of metallic
particles (not blocked by the filter) or organic substances.
In contrast, well water generally contains these substances which can cause algae blooms and serious damage
to the minipool. If water service is not available, install filters (filtration of no less than 50 microns) upstream of the
plumbing system that guarantee characteristics comparable to those of tap water.
The company is not liable for problems resulting from failure to install them.
220
FUSION SPA
Standard left
version
230
FUSION SPA
Standard left
version
EN
A Water connection from 10° to 36°C 1/2" M
B Floor drain flush with the floor ø40
C Electrical connection (power cord type H05
with three wires (single-phase 230V)
15
Fusion
minipool
Right version on
request
Right version on
request