Identification Of The Installation Site; Outdoor Installation; Indoor Installation - treesse Fusion Spa 200 Preinstallation Manual

Pre-Installation
3

IDENTIFICATION OF THE INSTALLATION SITE

When choosing the position, take into account
the local regulations that prohibit any electrical
installation (plug sockets, switches, lamps, etc.)
in the area surrounding the minipool for a distance of at
least 60 cm and a height of 230 cm.
When choosing the position, bear in mind that
the inspection side (electrical/plumbing
components side) must always remain accessible
for future maintenance.
The recommended ambient temperature for the bathtub
must be between -5°C and 45°C, with a relative humidity
of 20-80%.

OUTDOOR INSTALLATION

Take into account the proximity of trees or hedges, and
note that debris (e.g., leaves) can cause damage to the
equipment over time that is not covered by warranty and
make maintenance more expensive and frequent.
Also assess the best position to safeguard privacy and
respect for others, as well as the best view or climatic
position consistent with local regulations.
A sunny area with increased exposure during the morning
ensures greater well-being for users!
Consider the geological composition of the soil
on which the supporting platform will be built.
Soils that are very sandy, permeable or subject to
flooding could compromise the durability of the
minipool's support platform.

INDOOR INSTALLATION

Note that the evaporation of water in the minipool in the
presence of high internal temperatures can generate very
high levels of humidity in the environment.
To overcome this drawback, choose an environment with
good natural or forced ventilation. As an alternative,
install a dehumidification system. Humidity damage is
not covered by the manufacturer warranty.
Take into account the size of the minipool: narrow
passages, doors and steps can be an obstacle to
its transport to the desired place.
Before preparing the supporting surface, see the
sections on the plumbing and electrical
connections for positioning the connections
correctly.
Treesse minipools are built to be positioned outdoors.
If you install the minipool inside, remember that it must be able to be easily inspected or moved for any ordinary
and extraordinary maintenance operations.
EN
11
Fusion
minipool