Indoor Unit Registration - Fujitsu Airstage UTY-DCGYZ1 Operating Manual

3-4-3. Indoor Unit Registration
Register the indoor unit to be controlled by this controller.
(3)
(1)


3-4-3-1. Address Number Registration
Register the indoor units in the specified refrigerant system range.

3
En-34
(2)

(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Indoor Unit Registration].
(4) Select the process from the submenu below.
No. Item
Deletes the currently registered indoor
"Address
units and registers the indoor units in
Number

ascending order of address.
Registration"
→Refer to 3-4-3-1.
Registers the indoor units manually
"Manual
without deleting the currently registered

Registration"
indoor units.→Refer to 3-4-3-2.
Note
When "Address Number Registration" is performed, the
registered address setting will be deleted. In the case of
manual registration, the registered address is not deleted.
(1) Set the item and tap the [Register] button.
No. Item
Inputs "Refrigerant System Range" to
"Refrigerant
be registered for indoor unit.

System Range"
[Initial value: 00-99]
Selects from "Priority Mode" or
"Setting of
"Normal".
Network

"Priority Mode": Performs the scan by
Priority Mode"
stopping the system.
• When the checkbox is checked, the
(Checkbox)
"Create a
3
new group
automatically."
• Created group name: Group **
* When some users operate remotely, the left message is
displayed. When the [OK] button is tapped, all connections
will be disconnected by this operation.
(2) Register the indoor unit.→Refer to 3-4-3-3.
Description
Description
group of only the newly added indoor
unit (R.C.G.) is created. When not
checked, the newly added indoor unit
does not belong to the group.