Initialization - Fujitsu Airstage UTY-DCGYZ1 Operating Manual

(When "Operation Stop Time" is selected)

3-4-9. Initialization

Perform the Initialization of this controller.
All registered contents will be deleted and returned to the factory default setting by this function.
Please use this function with great caution.
(1) (3)
En-40
(When "Start Time" and "End Time" are selected)
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Initialization].
(2)
(4) When initializing this controller, tap the [OK] button.
Wait for a while without turning off the power.
After the initial setting screen appears, set according to the
wizard. →Refer to 1-5.