Initial Setting - Fujitsu Airstage UTY-DCGYZ1 Operating Manual

1-5. Initial Setting
After Central remote controller installation work is complete, perform initial setting by the following procedure before
starting to use the system.
Turn on the power
(Breaker ON)
Initial setting start
Initial setting end
Operation start
(Refer to Chap. 2.)
En-12
Only when the power is turned on for the first time or immediately after
initialization is set, the following wizard are displayed in wizard format.
Perform the settings.
(1) Language Setting→Refer to 3-4-1(4).
(2) Panel Calibration→Refer to 3-2-2(4).
(3) Central Controller Address Setting→Refer to 3-4-2(4).
(4) Indoor Unit Registration→Registration→Refer to 3-4-3-3.
(5) Date Setting→Refer to 3-2-4-1, 3-2-4-2.
* Automatic scan for all units connected at initial start-up is performed and
one group is created.
Monitoring screen is displayed. Perform the settings as necessary.→Refer to
Chap. 3.
Air conditioning starts on the Monitoring screen.