Temp. Unit Setting; Remote Setting - Fujitsu Airstage UTY-DCGYZ1 Operating Manual

3-4-4. Temp. Unit Setting
Set the temp. unit to be used by this controller.
(3)
(1)
3-4-5. Remote Setting
Perform the network setting for remote control.
(3)
(1)


3
En-36
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Temp. Unit Setting].
(2)
(4) Tap the temp. unit [ºC] or [ºF].
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Remote Setting].
(2)
(4) Set the item and tap the [OK] button.
4
(*) Max. 20 alphanumeric characters and symbols
No. Item
Selects whether LAN connection is
"Wired LAN"

used or not.→Refer to 3-4-5-1.
"Network Sets the network when LAN connection

Setting" is used.→Refer to 3-4-5-2.
Sets the user ID (Max. 20 characters)
"User ID" (*) for remote login when LAN connection
3
is used.
Sets the user password (Max. 20
"Password" (*) characters) for remote login when LAN
4
connection is used. [Initial value: 0000]
Description