Vacation; Child Lock; Indoor Unit Stop; Emergency Stop - Fujitsu UTY-RNRUZ2 Operating Manual

1-1-3 Vacation

When the room will be empty for a long time due to vaca-
tion, etc., disable the indoor units schedule and continue the
unoccupied state by the following operation:
(1) Touch the [Vacation] on the Monitor Mode Screen.
Note
In the following state, [Vacation] is not displayed on the
Monitor Mode Screen.
• Schedule is not set. Refer to [3 SETTING] → [3-4
Weekly Timer Setting].
• Indoor Unit Stop is enabled. Refer to [1-1-5 Indoor Unit
Stop].
(2) The "Vacation" screen is displayed, and the following
states are continued:
• The indoor units enter the unoccupied state. (When
[Away] is set, the set value is displayed and when the
room temperature reaches the set value, [Away Op-
eration] is performed.)
• [Disable] is set to the Schedule.
(1)
Mode Set Temp.
80°F
Cool
Custom
Auto 74°F
Heat
Room Temp.
Cool 84°F
Away
76°F
Heat 68°F
Vacation Status
(3) When "Cancel" is touched, [Vacation] is reset and the
display returns to the Monitor Mode Screen. Schedule
returns to [Enable].

1-1-4 Child Lock

When this screen is displayed by
touching the monitor mode screen,
the unit is in child safety lock.
• Child safety lock set/reset:
Press the Operation button for 4 seconds or more while
touching an area outside the operation section of the moni-
tor mode screen (no response even if touched). Set/reset
can be performed even while the indoor unit is stopped.
The setting cannot be performed at screens other than the
monitor mode screen.
En-7
(2)
Fri 10:00AM
Fan
Vacation
Auto
Away Operation
Occupied
Menu Cancel
Child Lock Valid Child Lock Valid
Fri 10:00AM
Mode Set Temp. Fan
Cool 80°F
Custom
Auto
Auto
Heat 74°F
Cool 84°F Room Temp.
Away
76°F
Occupied
Heat 68°F
Vacation Status Menu

1-1-5 Indoor Unit Stop

When cleaning an indoor unit or when the room is not used,
etc., the indoor unit can be stopped. When setting, temporar-
ily stop the indoor units and disable the following functions
so that they cannot be operated automatically. During this
time, an icon is displayed on the Monitor Mode Screen.
• Weekly Timer Setting
• Away Setting
When reset, disabled functions are also reset.
• Indoor Unit Stop set/reset:
Press the Operation button for 5 seconds or more. Set/
Reset is possible in the occupied, unoccupied, and Away
operation states. The setting cannot be performed at
screens other than the Monitor Mode Screen.
Fri 10:00AM
Note
Operation button can be operated even if Indoor Unit Stop
is enabled.

1-1-6 Emergency Stop

This screen is displayed when the
system was emergency stopped by
operation from the outside. When
emergency stop is reset, the moni-
tor mode screen is displayed.

2 CONTROL

2-1 Operation On/Off
(Occupied/Unoccupied)
(1) Press the Operation button.
The LED lamp remains lit while the indoor unit is operat-
ing.
Fri 10:00AM
Mode Set Temp. Fan
80°F
Cool
Custom
Auto
Auto Heat 74°F
Cool 84°F Room Temp.
Away 76°F
Occupied
Heat 68°F
Vacation Status Menu
Operation button
Fri 10:00AM
Mode Set Temp.
Fan
80°F
Cool
Custom
Auto
Auto 74°F
Heat
Room Temp.
Cool 84°F
Away
76°F
Heat 68°F Occupied
LED lamp
Vacation Status Menu
Operation button
Emergency Stop