Disp; Contrast - Belitronic BJ5000 Ex Manual

Main screen
Navigate [E6]
DISP [E611] - Brightness (Background intensity) or display 0-100%.
Light time [E611 P] is the illumination time that the display is lit after the last button press. The setting
can be from 0.1 second up to 60 seconds or "On", which gives constant illumination, which is also the
factory default.
Contrast [E611 PP] Display blackness. Factory default is 80%. If the machine is placed high, the
entire display tends to turn black. Then lower the value. Alternatively, if placed low, increase the value
if the display blurred. During startup and when displaying Reset menu the display has a fixed value if
the user accidently sets a value hard to read.
Language [E611 PPP] Ex can display text in two different languages. English and Norwegian.
BAR [E612] Main screen can display up to two optional values. Choosen parameter for upper bar
[E612] will be shown on row 3, and Chosen parameter for lower bar [E612 P] on row 4.
Row 3 temporary displays the DRAG, CATCH and BRAKE ​ ​ i f any of it's buttons are pressed. Line 4
shows optional value all the time. Optional values are not showed simultaneously with Line out, if
Line out font is selected to 100% (see BIG [E613]) because of the lack of space
The following options are available for upper and lower posts:
• WEIGHT. Motor power consumption. Each line corresponds to 0.4 amps and a block of 3 amps.
See High load or Low load on page Machine 4.
• MotNm (Newton meter). Shows how much torque the engine should provide. The value is
controlled automatically by Ex when increases / decreases DRAG.
• Rpm. Engine speed in revolutions per minute.
• Batt. Displays the battery voltage to Ex. Measured inside the machine at cable connections. May
be helpful to see if voltage drops occurred, caused by bad battery, defective joint, loop contact or if
long or straight cables are used.
• Boost. Motor (internal) power supply voltage. Normally between 33-40 volt.
• Temp. The temperature inside the box.
• ClutNm (Newton meter). Shows how much torque the clutch should provide.
• -------. No value is displayed on the line.
Table shows units and value limits. See [E654] for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Screens
DISPLAY – Brightness
DISPLAY – Light time
DISPLAY – Contrast
DISPLAY – Language
BAR - Choose upper parameter
BAR – Choose lower parameter
DISP [E611] - BAR [E612]
Menu [E61]
Min Max Factory
MORE – DISP – DISP [E611]
0 100
OUT..60s.. IN
0 100
Norwegian, Engelska
MER- DISP - BAR [E612]
See list above
See list above
[E611] – [E612]
Step Unit
80 1
IN 0,1 Seconds
70 1
Navigation
% [E611]
[E611 P]
% [E611 PP]
[E611 PPP]
[E612]
[E612 P]