Belitronic BJ5000 Ex Manual page 10

These six buttons under the display have several different functions.
Function1. From Main screen, the buttons DRAG, CATCH and BRAKE are reached directly with the
buttons below the display. The first press shows the desired value as shown in row 3. Another push or
held in will change the value. After a set time Showtime [E614], chosen "Value for upper row" will
return on row 3. In this example, the engine torque "Nm"
Screen when DRAG buttons are pressed
Main screen shows nothing on upper row as
default setting.
Example MENU [E]
Function 2. The buttons are used for menu
navigation. Each one corresponds to one of the
options shown in the display. MORE and RET
option found in several menus leads to and from
additional menus.
Code screen
Step one digit
to the right >
Step one digit
to the left <
Function 4. To change huge numbers such as
the theft code, each digit is changes individually.
As shown in the illustration, Button [2] and [5] is
used to change the digit position, which is
indicated by an arrow. Buttons [3] and [6] are
used to increase or decrease the selected digit
value. To confirm the value, press [P]rog.
PUSHBUTTONS
Buttons [1]-[6] (DRAG, CATCH och BRAKE)
Screen when CATCH buttons are pressed
Increase with 1
Decrease with 1
Machine - 3
Screen when BRAKE buttons are pressed
Example of setting a value
Function 3. For setting and changing the values. By
changing the three digits (100s, 10s and 1s)
individually. Decimal numbers such as Times,
changes in the 10's, 1's and 0.1's.
For 4 digit numbers, the first digit (1000's) changes
with 100-digit buttons.
Group screen
2
1
4 5
Function 5. In group screens, the six buttons
correspond to machines in the group. Each press of
the button switches the machine in or out to control.
Machines being control are surrounded by a black
frame.
Shows Unit
3
Machine
addresses
6