Information In Group Screens; Dashes - Belitronic BJ5000 Ex Manual

Information in GROUP screens.

Information as Line out, Fishing mode, Wheel and Motor status is shown as described below.
Group screen
Fishing mode
No answer
COMMUNICATION
1
4
Motor and wheel status
Automatic
Fishing mode.
Automatic.
Fish caught
(Flashes)
Manual mode
(Empty sign)
Dashes. Machine is not responding to communication. Possible reasons.
• Error in communication. Temporary stops may occur but
communication will automatically restart.
• Collision. Two or more machines have the same address setting, while
they are in the same group. Change address or move machine to
another group.
• Machine turned off.
• Machine is addressed into a group that master does not call.
• Machine is deactivated (set to OFF) in setup, in the master. See page
Communication-1 Chapter "Enable / Disable Network Machines" for
changes.
Communication - 2
GROUP A
Address position in
2 3
GROUP screens
5 6
Line out. Note, when "-" is showed
the font size is reduced to fit.
Excample shows machine
with address 3 i group 1.
ARROW UP. Motor runs.
DRAG force on wheel.
ARROW DOWN. Motor
stopped. BRAKE force
on wheel
EMPTY SIGN. Motor
stopped. DRAG force on
wheel.