Manage / control machines in the group.
The machines that will be controlled are selected by pressing the buttons 1-6 below the display.
Machines that are chosen get an inverted graphics. Light text on the black background, while machines
that will not be affected appear in plain text, black on light background.
Address position in
Group screens
GRUPPE A
1
2
3
4
5
6
Machine NOT chosen for receiving command
Normal text:
Black text on light background.
The buttons that can be sent as command to other machines are as follows.
• [Z]ero. Works at any time if the machine is selected.
• [A]uto. Works at any time if the machine is selected.
• [S]Top. Works at any time if the machine is selected.
• [U]p. Works at any time except in these two cases.
• To prevent accidents while working with the fishing line. Bringing up the GROUP screen will
block the Key [U]p button command.
• Line out is above the Zeropoint. Motor does not start because it's already up.
When GROUP screen is showed, the local machine is also controlled like all other machines. The local
4 buttons above only affects the local machine, unless it's GROUP is shown and local machines
address is selected. This is because otherwise the local machine would react on every button pushed
that is made to all other machines.
COMMUNICATION
Group screen
Communication - 3
Example
Machine 1,2 and 5 chosen .
Machine 3, 4 and 6 not chosen ,
and machine 4 does not respond
OR is deactivated.
Machine Chosen to receive commands
Inverted text:
Light text on Black background