Pause - Belitronic BJ5000 Ex Manual

Main screen
PAUSE – Autopause [E2] is the time it takes after [A]uto is pressed until the machine begins to fish. The
break is for the sinker to fall down and stretch the line as straight as possible before it is released. With
Autopause [E2], the [A]uto button can be pressed when hook has entered into the water without having
to wait.
PAUSE – Depth [E2P] is a pause that occurs when Depth is reached and the line remains idle before Jig
Length commands are made. Available in all Fishing programs.
CATCH – Time up [E3] (This is described under High load on page Machine – 4).
CATCH – Time down [E3P] (This is described under Low speed on page Machine – 4).
CATCH - Speed ​ ​ b rake [E3P P] (This is described under High speed on page Machine – 4).
CATCH - Wheel laps [E3PPP]. This is described under Pulled out line on page Machine – 4).
CATCH – LED Brightness [E3PPP P] Is the power to Catch LED, when blinking in Catch mode. "0%"
will disconnect the Catch LED. While CATCH - Brightness screen displays, the power is constantly on for
adjusting the power.
CATCH – Restart [E3P PPP P] When motor stops at Zeropoint during Catch mode up, or by Stop At
Sea [E442], Restart [E3P PPP P] can be used to restart the Fishing mode. It's the same as pressing
[A]uto button.
CATCH – Show Catch Depth [E3PPP PPP] decides when Catch depth will be displayed."Always at
Catch" will show Catch depth in display during the whole Catch mode as normal. "After hauling up" will
show Catch depth only after machine Stops at Zeropoint, and makes less distraction in display. "Never"
turns of the display of Catch depth off complete. This option is also automtically used in Mackerel
program.
Table shows units and value limits. See [E654] for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Screens
PAUSE – Auto
PAUSE – Depth pause
CATCH –Time up
CATCH – Time down
CATCH – At speed brake
CATCH – Wheel laps
CATCH – LED Brightness
CATCH – Restart
CATCH – Show Catch depth
PAUSE [E2] - CATCH [E3]
Menu [E]
Min Max Factory
PAUSE [E2]
0,5 10,0 0,5
0,5 25,0 0,5
CATCH [E3]
0,1 10,0 1,0
1,0 25,0 Out
Out IN Out
Out 33,0 1,0
Out 100 100
Out 99,9 Out
Never / After hauling up / Always at catch
[E2] – [E3]
Step Unit
0,1 Second
0,1 Second
0,1 Second
0,1 Second
- -
0,1 Wheel laps
1 %
0,1 Second
Navigation
[E2]
[E2P]
[E3]
[E3P]
[E3PP]
[E3PPP]
[E3PPP P]
[E3PPP PP]
[E3PPP PPP]