Table of Contents
Advertisement
Finalizing the Installation
Intake Restrictor Adjustment
The intake restrictor is located on the back wall of the firebox. To adjust the restrictor, follow the steps
below:
© Travis Industries
(for qualified installers only)
Position # 1 (open)
1/4"
Socket
Loosen the two screws
holding the intake
restrictor in place..
Position # 2 (closed)
Slide the restrictor down
to the lower position and
tighten the screws.
5/8/2019 - 1505
25
564 GSR2 25K CF
Advertisement
Table of Contents
