Technical Data; Data And Measurements - SORG Vector Instructions For Use Manual

5 Technical data

5.1 Data and measurements

Vector
Model: Vector
Type: 790
Aid index no.: 18.50.03.1076
All measurements ± 5%
Designation
Seat width (SW)
in 20 mm increments
Seat depth (SD)
in 20 mm increments
Back height (BH)
in 25 mm increments
Upper edge (UE) seat to
upper edge (UE) foot-
rest
Back angle:
Lower leg length:
Seat angle
Frame length 2
Frame size 3
Frame size 4
Frame size 5
ETRTO wheel size 22"
ETRTO wheel size 24"
ETRTO wheel size 26"
Handrim size
Handrim size
Handrim size
Handrim diameter
Camber
Seat height (SH) front
Seat height (SH) front
Seat height (SH) rear
Seat height (SH) rear
Width wheelchair absolute min.
Length wheelchair absolute min.
Height wheelchair ab-
solute
Permissible incline
Permissible downward
gradient
Resistance to tilting
Turn radius
Load (max.)
Weight test dummy
Empty weight fit for use
10.9 kg at:
Individual weights
Tyres
Usage life
Service life
Normative requirements The wheelchair complies with the requirements of ISO 7176-8 and the requirements
44 of 48
Dimensions
260-460 mm
280-460 mm
250-450 mm
for footrest indoor 300-325 mm
installation with 85-360 mm
XL-framefor footrest 300-490 mm
external installation 355-520 mm
with XL-frame
80 - 120°
45 - 520 mm
0 - 10°
543.6 mm
574.0 mm
594.0 mm
634.3 mm
Ø 25-489
Ø 25-540
Ø 28-590
at 22" Ø max. 481 mm
at 24" Ø max. 533 mm
at 26" (660mm) Ø 585 mm
Ø 19 mm
0°, 2°, 5°, 8°, 11°
min. 375 mm
max. 515 mm
min. 320 mm
max. 580 mm
SW + 200 mm
max. SW + 405 mm
min. 835 mm
max. max. 970 mm
with push handles min. 750 mm
Standard XL max. 1120 mm
with push handles max. 1055 mm
height adjustable XL max. 1320 mm
12.3% = 7°
12.3% = 7°
12.3% = 7°
approx. 1000 mm dependent on the wheelchair size
120 kg
Frame SW/SD 26/28, driving wheels 22", casters 4" polyurethane, leg supports conti-
nuous, seat and back cover, side guard
Driving wheels 0.97 - 2 kg
Frame 8 kg
Conventional pneumatic tyres, sizes 1", 1 3/8" or puncture proof tyres (same dimen-
sions), tyre pressure usually 3-10 bar
3 years
5 years
against ignition.
Instructions for use Vector & Vector BSA
Remarks
from any seat width 40 mm growable
from any seat width 40 mm growable
from any height max. 50 mm growable
The lower leg length is the distance from:
UE seat to UE footrest PLUS thickness of the
seat cushion.
depending on design
depending on design
pure frame length
measured without push handles, firm curved
back plate, wheels or footrest
Conventional pneumatic tyres in sizes 1"
(25.4 mm), 1 3/8" (35 mm) - sizes 355 mm
(20"), 451 mm (22"), 540 mm, (24"). All punc-
ture­proof tyres in the specified dimensions.
Tube diameter
with drum brake wheels: 2°, 5°, 8°
The seat heights are measured from the up-
per edge of the seat to the floor, WITHOUT
seat cushions!
For smallest or largest camber
With steering and pushing aid correspond-
ingly longer.
Depending on size and design
in case of non-excessive strain
2020-09-01