Handling; Handling Driving Wheel; General Information Regarding Wheels; Tyre Inflation Pressure - SORG Vector Instructions For Use Manual

3.1 Handling driving wheel

3.1.1 General information regarding wheels

Frictional heat is generated by braking the wheels on the handrims.
Handrim covers can stretch when exposed to heat and become detached from the handrim.

3.1.2 Tyre inflation pressure

You can find the right operating pressure on
the tyre casing – usually 3-10 bar. (1)
If the tyre is flat, please contact
your specialist dealer.

3.1.3 Quick-release axles

Remove:
(1)
1.
Insert:
(1)
(2) After insertion, the locking ball (A) must be visibly protruding. Pull at least 1x after
each insertion to test whether the quick-release axle is engaged. It should no longer be possi-
ble to pull the wheels outwards.
14 of 48
(1)
(2)
(2)
Instructions for use Vector & Vector BSA
1.
(A)
2020-09-01