Technical Data; Data And Measurements - SORG Loop RS Instructions For Use Manual

5 Technical data

5.1 Data and measurements

Model: Loop
SORG
Type: 803
Measurements ± 5%
Designation
Seat width (SW)
Seat depth (SD)
Back height (BH)
Back angle:
Back angle with
gas pressure spring
Leg support
intake
Tilting
ETRTO wheel size
ETRTO wheel size
ETRTO wheel size
Handrims
Camber
Seat height (SH)
with horizontal seat and
horizontal frame
Width wheelchair abso-
lute
Length wheelchair ab-
solute
Height wheelchair abso-
lute
Height wheelchair back
folded in
Permissible incline
Permissible downward
gradient
Resistance to tilting
Turn radius
Load (max.)
Empty weight min.
Individual weights
Tyres
Corrosion protection
Usage life of the wheel-
chair
Service life
Normative
requirements
2019-08-16
RS
Dimensions
20 mm incre- 300 to 480 mm
ments
20 mm incre- 300 to 480 mm
ments
50 mm incre- 300 to 600 mm
ments
80° to 120°
90° to 117°
can be shifted forward by
approx. 60 mm
from -3 ° to +34 °
at 20" Ø 451 mm
at 22" Ø 489 mm
at 24" Ø 540 mm
Ø 19 mm
0° or 2°
A-wheel 410 mm
20"/22" 500 mm
Caster 5"/5.5"
A-wheel 430 mm
20"/22" 530 mm
Caster 6"/7"
A-wheel 24" 460 mm
Caster 5"/6" 530 mm
A-wheel 24" 505 mm
Caster 7" 550 mm
min. 520 mm
max. 810 mm
min. 790 mm at 20", leg support standard
max. 1200 mm at 24" driving wheels, seat depth 480 mm, leg support detachable
min. 830 mm
max 1430 mm
min. 550 mm
max. 620 mm
12% = 7°
12% = 7°
12% = 7°
approx. 1100 mm
120 kg
19.5 kg
fit for use at:
Seat height 300
mm, wheels
20", swivel
casters 5" poly-
urethane
Driving 1.2 - 2.2 kg
wheels
Leg supports from 2 kg
Conventional pneumatic tyres (1" or 1 3/8" for 12" wheels) or puncture proof tyres
(same dimensions), tyre pressure usually 3-10 bar
Material Stainless steel, aluminium
Coating Powder coating, galvanising
3 years in case of non-excessive strain
5 years
The wheelchair complies with the requirements of ISO 7176-8 and the requirements
against ignition.
Instructions for use Loop
Remarks
+40 mm
growable
± 20 mm
(optional + 60 mm) growable
+50 mm
growable
in rasters
infinitely variable
infinitely variable
infinitely variable
with drum brakes (TRB)
Tube diameter
4° only limited
Height adjustment
+20/+40 mm
Height adjustment
+20/+40 mm
Height adjustment
+20/+40 mm
Height adjustment
+20/+40 mm
dependent on camber and wheel type
at WH 300 mm and
22" driving wheels
at WH 600 mm and 24" driving wheels
at 0° tilt and 0° inclination of the back
angle
dependent on the wheelchair size
incl. seat shell
Frame, seat plate, drum brakes, han-
drims, swivel casters, leg supports,
push bail, tilt mechanism
depending on design and size
RS
SORG
45 of 48