Maintenance & Repair; Storage & Transportation; Overload Indicator - REID LIFTING PORTADAVIT QUANTUM Assembly & Operation Manual

Maintenance & Repair
In order to ensure correct operation, the conditions
for inspection and maintenance must be complied
with. If any defects are found, stop using the
product immediately.
No alterations or additions to the equipment
should be made without the written consent of the
manufacturer. Any repair must be carried out in
accordance with the manufacturer's procedures.
It is recommended to maintain the equipment in a
clean and dry manner. Cleaning is suggested using
a sponge or cloth with warm, soapy water, rinsing
and allowing to dry.
This product must be assembled using metric
fixings of the same type and quality as those
supplied by the original manufacturer only.
Failure to do so could have an impact on the
structural performance and stability of the
product.
Storage & Transportation
When transporting the components, take note of
all the manual handling considerations.
Do not throw the product down or stack any
items on top of it.
Always place carefully and security on the
ground to avoid damaging the equipment.
PORTADAVIT

Overload Indicator

This product is fitted with a mechanism that will
indicate if the structure has been overloaded.
There are two warning signs to look out for:
The pin to lock the two jib components
together is difficult to insert or can't be
inserted completely when the upper jib is
retracted into its vertical stowed position after
use
The upper part of the jib itself can't be fully
retracted into its stowed position
If either of these occur, quarantine the
equipment immediately and contact your REID
representative.
QUANTUM
9