It is expected that all users of this product have the the overall capacity of the davit. REID Lifting’s Attach the hoist to the dedicated lifting point in conjunction with the product also needs to be Yellow 1/8”-3/16”...
Page 4
Warning Fall Protection Additional Notes for Correct Operation Warning REID lifting sockets & extensions have been The equipment should not be used outside Fall arrest: This product contains a safety anchor Ensure suitable and appropriately rated When using the Davit in conjunction with any...
Inspection & Maintenance PORTADAVIT QUANTUM Regular Inspections Maintenance & Repair Storage & Transportation Overload Indicator The following information is based on REID Before use, the product should be inspected for Lifting’s recommendations and does not remove visual defects using the checklist below: To ensure that the product’s remains in safe In order to ensure correct operation, the conditions When transporting the components, take note of...
Page 6
Depending upon the socket type, there are a duration of 3 minutes. loading directions by REID Lifting are approved to be used with this The Cast & Resin Bonded sockets can be number of different installation options. If bolts For more detailed requirements please contact...
Page 7
Inspections must be instigated by the user prior and REID Lifting Ltd will not accept any vapours or mists or by air and dusts mixtures are of protection where mixtures of air and gases, applies especially in the case of rust or surface materials that could create electrostatic charging.
Page 8
Assembly Instructions PORTADAVIT QUANTUM The PORTA DAVIT QUANTUM (Type S) and its constituent components are described in the image below. The use of a socket extension is optional and the socket type may vary between a Top Mount, Side Mount, Bridge Mount, Cast In or Resin Bonded, depending on application. Assembling the PORTA DAVIT QUANTUM - Type S (Shackle only) Head PORTA DAVIT QUANTUM...
Page 9
Assembly Instructions PORTADAVIT QUANTUM The PORTA DAVIT QUANTUM (Type W) and its constituent components are described in the image below. The use of a socket extension is optional and the socket type may vary between a Top Mount, Side Mount, Bridge Mount, Cast In or Resin Bonded, depending on application. Assembling the PORTA DAVIT QUANTUM - Type W (Winched) Head 3x Sheaves...
Page 10
Assembly Instructions Notes PORTADAVIT PORTADAVIT QUANTUM QUANTUM Variants & Adjusting the Radius Options. The decal specifies the reach values with the upper value stating the outer shackle position and the lower value stating the inner shackle position For disassembly, reverse steps 1-6. Ensure the radius adjustment pin is fully engaged before use.
Variants & Options Notes PORTADAVIT QUANTUM The list below outlines additional options When the rotational handle is attached to the Fig 1 available which can be fitted to the PORTADAVIT Davit the following points must be observed: QUANTUM; Attach the rotational handle to the column of the Davit at a suitable height [Ideal position Rotational Handle should be around hip height].
Page 12
Dimensions Dimensions PORTADAVIT QUANTUM (Winched) PORTADAVIT (Shackled) PORTADAVIT QUANTUM QUANTUM 116.5” Overall height Radius Dimensions Adjustment Height to outer shackle Points Part Number Capacity (lbs) Height to inner shackle Radius to outer shackle 79” 76¼” 70¾” 47¼” 43¼” US-PDQ1S Radius to inner shackle C B A A B C 1320lbs...
Accreditations Conformité Européenne [CE] & Testing Product IPR LEEA Membership - REID Lifting is a full member of the Lifting Equipment Engineers Association UK Conformity Assessed [UKCA] This product complies with the following: Quality and Safety are at the heart of the REID...
Product Labelling Key Product Labelling Product Labelling PORTADAVIT QUANTUM Product labelling The following labels must be present on your system and must be legible. Safety Labels Serial Labels Insert and secure the bolt before The system is not suitable for fall arrest loading the system.
Page 15
Product Identification & Inspection Record Notes PORTADAVIT QUANTUM Periodic Examination & Repair History Insert data from serial numbers found on product Marking into table here: The serial labels indicate: Date Inspected by Pass/Fail Corrective Action Comments The product identification number The product’s unique serial number The goods’...
Page 17
All information herein is copyright protected by REID Lifting Ltd. All company and product names are Trade Mark and Trade Name protected and all REID Lifting Ltd. Product IPR is protected under Patents, Patents Pending and/or Design Rights.
Need help?
Do you have a question about the PORTADAVIT QUANTUM and is the answer not in the manual?
Questions and answers