ETC ColorSource Linear Installation Manual page 14

ETC Installation Guide
ColorSource Linear v1.7
Lock the User Interface
After you have set up the fixture, you can lock the user interface to prevent
additional changes.
1. Press and hold the Up button and Down button simultaneously for
3 seconds. The display will show
is locked.
2. To unlock the user interface, press and hold the Up button and Down
button simultaneously for 3 seconds.
Update the Fixture Software
ETC recommends using UpdaterAtor software to manage software updates.
For more information on UpdaterAtor, see the UpdaterAtor Software Quick
Guide , which you can download for free from etcconnect.com.
When you add a ColorSource fixture running a newer software version or
update a ColorSource fixture to a newer software version using UpdaterAtor,
you can use that fixture to push the newer software version to all connected
ColorSource fixtures, except for ColorSource Spot jr fixtures. ColorSource
Spot jr fixtures can only update (and be updated by) other ColorSource Spot jr
fixtures.
1. Remove power and DMX In from the master fixture that is running the
software version that you want to push to other fixtures.
2. Press and hold the Up button and Down button simultaneously while
restoring power.
3. The display will show
selected.
4. Press the Mode button to start the update process.
•
•
5. Reconnect DMX In on the master fixture.
ColorSource Linear
Udt rdy
The display will alternate between
complete while updating.
The master fixture will reboot once the update is complete.
Loc
to indicate that the user interface
to indicate the update mode is
Udt
and the percentage
Page 14 of 20 ETC