Notes About The Documentation; Contact; Information Regarding Installation And Operation Manual; Other Applicable Documents - Beko BEKOMAT 13 Original Installation And Operation Manual

BEKOMAT ® 13, 13 CO, 13 CO PN25, 13 CO PN40

1. Notes about the documentation

This documentation contains all the necessary steps for installation and operation of the product and the accessories.

1.1 Contact

Manufacturer
BEKO TECHNOLOGIES GmbH
Im Taubental 7 | D-41468 Neuss
Tel. + 49 2131 988 - 1000
info@beko-technologies.com
www.beko-technologies.com

1.2 Information regarding installation and operation manual

INFORMATION Copyright protection!
The contents of the installation and operation manual in the form of text, figures, illustrations,
i
photographs, technical drawings, diagrams and other representations are protected by the
copyright of the manufacturer. This applies especially to duplication, reproduction, microfilming
and storage as well as processing in electronic systems.
Publication date
01/01/2020
The installation and operation manual, hereinafter referred to as the manual, must always be kept close to the product
and be in a permanently legible condition.
The manual must be handed over along with the product if it is sold or passed on.
NOTE
Follow the instructions given in the manual!
This manual contains all the basic information required for safe operation of the product and
must therefore be read before any actions are performed. Otherwise personal and material
hazards as well as malfunction and device failure are possible.

1.3 Other applicable documents

More detailed information can be obtained from the following documents:
• Installation and operation manual: Thermostatically controlled heating system and insulation shell
• Installation and operation manual: Trace heater
4 | 64
Revision Version
00 00
Original installation and operation manual
Customer service and tools
BEKO TECHNOLOGIES GmbH
Im Taubental 7 | D-41468 Neuss
Tel. + 49 2131 988 - 1000
service-eu@beko-technologies.com
www.beko-technologies.com
Reason for amendment
Changes to standards and
regulations
Scope of amendment
Completely new version