Commissioning; Warning Notices - Beko BEKOMAT 13 Original Installation And Operation Manual

Original installation and operation manual

8. Commissioning

8.1 Warning notices

DANGER
DANGER
WARNING
Pressure build-up in the pipework!
Death or serious personal injury can result through contact with fast or suddenly escaping
compressed gas or through bursting system parts.
• All work on the compressed gas system must be carried out in the depressurised state
and with the compressed gas system secured against unintentional pressure build-up.
• Set up a safety area around the working area during all assembly, installation,
maintenance and repair work.
• Before building up pressure in the pipework, check all pipe connections and tighten if
necessary.
• Slowly pressurise the system with pressure.
• Avoid pressure blows and high differential pressures.
• Assemble all pipelines without stress.
• Install pipes tightly as feed and discharge lines.
Electric voltage!
There is a danger of death or serious injuries as well as malfunction and device failure
following contact with components which are in contact with electric voltage.
• Only carry out installation, maintenance and repair work on the product and accessories
when they have been disconnected and secured against being switched back on again.
• Set up a safety area around the working area during all installation, maintenance and
repair work.
• For installation of the device, adhere to all applicable regulations (e.g. VDE 0100 / IEC
60364/ ATEX).
• Connect the protective conductor (earth connection) according to regulations.
Insufficient qualification!
Insufficient qualification of the personnel carrying out work on the product and accessories
can lead to accidents, personal injury and damage to property as well as impair operation.
• All work on the product and accessories may only be carried out by skilled technical
personnel - compressed gas technology.
BEKOMAT 13, 13 CO, 13 CO PN25, 13 CO PN40
®
33 | 64