Advertisement
EN - english
ES - español
FR - français
PT - português
Instructions for installation and operation
Instruciones de instalación y de servicio
Instructions de montage et de service
Instruções de instalação e de serviço
Condensate drain / Purgador de condensados / Purgeur de condensat /
BEKOMAT
BEKOMAT
BEKOMAT
Condutor de descarga de condensado
BEKOMAT
®
13 CO PN25
®
13 CO PN50
®
13
®
(BM13)
13 CO
(BM13CO)
(BM13COPN25)
(BM13COPN50)
Advertisement
Table of Contents
Related Manuals for Beko BEKOMAT 13
Summary of Contents for Beko BEKOMAT 13
- Page 1 EN - english ES - español FR - français PT - português Instructions for installation and operation Instruciones de instalación y de servicio Instructions de montage et de service Instruções de instalação e de serviço Condensate drain / Purgador de condensados / Purgeur de condensat / Condutor de descarga de condensado BEKOMAT ®...
- Page 2 BEKOMAT 13 CO PN50 2000366 Functional test of BEKOMAT device: • Briefly press test button 2 sec. • Valve opens for condensate discharge. Checking of alarm signal: • Shut off condensate inflow. • Press test button for at least 1 minute. • Red LED flashes (after 1 minute). • Alarm signal is being relayed. BEKOMAT 13, 13 CO, 13 CO PN25, 13 CO PN50...
- Page 3 • LED vermelho pisca (passado 1 min). • Le signal d'alarme est activé 1 minuto • O sinal de alarme é activado. • el LED rojo parpadea (después de 1 min) • la señal de alarma se conecta BEKOMAT 13, 13 CO, 13 CO PN25, 13 CO PN50...
Need help?
Do you have a question about the BEKOMAT 13 and is the answer not in the manual?
Questions and answers
What causes the valve to remain open always
The valve in the Beko BEKOMAT 13 may remain open if the device keeps blowing off air. Possible causes include:
- Blocked control air line
- Worn parts
- Dirty sensor tube
- Incorrect or defective power supply
- Faulty control board
These issues prevent proper valve closing, causing it to stay open.
This answer is automatically generated
@Mr. Anderson thanks a million . At my case it was the relay fault on the control board.
What happens when the drain valve of bekomat constantly open discharging compressed air continuously
A constantly open drain valve on a Beko BEKOMAT 13 causes continuous discharge of compressed air. This may result from blocked control air lines or worn parts, and leads to unnecessary air loss.
This answer is automatically generated