Appendices; Approval Certificates And Declarations Of Conformity - Beko BEKOMAT 13 Original Installation And Operation Manual

BEKOMAT ® 13, 13 CO, 13 CO PN25, 13 CO PN40

16. Appendices

16.1 Approval certificates and declarations of conformity
Symbol Description / explanation
CE marking
The CE marking indicates that a product fulfils all the EU directives applicable for this product and that
basic safety and health requirements were met during manufacturing of the product.
The product may be sold on the European market.
FCC marking
The FCC marking indicates that a product fulfils the requirements of the Federal Communications
Commission (FCC) and that basic safety and health requirements were met during manufacturing of
the product.
The product may be sold on the US American market.
cTÜVus marking
The cTÜVus marking indicates that a product fulfils the requirements of TÜV Rhineland for the
Canadian and US American market and that basic safety and health requirements were met during
manufacturing of the product.
The product may be sold on the Canadian and US American market.
EAC marking
The EAC marking indicates that a product fulfils all the Eurasian directives applicable for this product
and that basic safety and health requirements were met during manufacturing of the product.
The product may be sold on the Eurasian market.
WEEE marking
The crossed out rubbish bin marks an electrical or electronic product that must not be disposed of with
domestic waste at the end of its service life. Free collecting points for used electrical equipment as well
as further acceptance points for reuse of the products are available for them to be returned. Addresses
can be obtained from the local authorities.
56 | 64
Original installation and operation manual