Thank you for purchasing this CLARKE Strongarm Transmission Jack, designed for use in the removal and installation of transmissions and differentials. Before attempting to use the jack, please read this leaflet thoroughly and follow the instructions carefully, in doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the crane giving you long and satisfactory service.
1 Vent Plug. 1 Instruction manual Visually inspect all components to ensure that no damage was suffered in transit. Any damage should be reported to your CLARKE dealer immediately. ASSEMBLY (Ref. Parts List) Turn the Wheel Brackets (item 40), so that the offset edge is facing down (see fig 1), and attach the castors (41) using the washers and nuts provided.
Using an oil can, slowly top up the oil until it begins to overflow. When the excess oil has completely drained off, replace the vent plug. NOTE: Top up using Clarke hydraulic oil (part number 3050830). We recommend that the hydraulic oil is changed after every 100 hours of operation.
RCTJ27 PARTS AND SERVICE For Spare Parts and Servicing, please contact your local dealer, or Clarke International on one of the following Numbers: Parts and Service Tel: 020 8988 7400 Parts and Service Fax: 020 8558 3622 or e-mail as follows: Parts: Parts@clarkeinternational.com...