Related Manuals for Clarke STRONG-ARM CTJ5GLB
Summary of Contents for Clarke STRONG-ARM CTJ5GLB
- Page 1 5 TONNE HEAVY DUTY LONG CHASSIS TROLLEY JACK MODEL NO: CTJ5GLB PART NO: 7623055 OPERATION & MAINTENANCE INSTRUCTIONS LS0609...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE 5 Tonne Heavy Duty Long Chassis Trolley Jack. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
-
Page 3: Specifications
If in doubt do not use. Have the parts replaced or consult your CLARKE dealer. 3. Make sure that the jack is on a firm solid base, and there is no possibility of it slipping when under load. -
Page 4: Parts Identification
PARTS IDENTIFICATION RELEASE KNOB HANDLE LOCK SADDLE COVER FRONT WHEELS CASTORS FOOT PEDAL... -
Page 5: Before Use
1. Open the release valve by turning release knob counterclockwise. 2. Remove the cover as shown. 3. Remove the filler plug. • Oil should be just up to the edge of hole. 4. Fill if necessary with Clarke hydraulic oil available from your local dealer. - Page 6 LUBRICATE INTERNAL COMPONENTS 1. Open the release knob. 2. Pump the handle several strokes to ensure proper internal lubrication. BLEED HYDRAULIC SYSTEM During transportation, the jack may become "air-bound" causing spongy ram action. TO BLEED THE HYDRAULIC SYSTEM - 1. Close the release valve by turning release knob clockwise.
-
Page 7: Operation
OPERATION POSITIONING Ensure the load is chocked and stable and on firm level ground. 1. Release the handle lock as shown on the right. 2. Turn the release knob counterclockwise, to lower the lifting ram 3. Position the jack so that the saddle is directly beneath the lifting point and that there are no obstacles to prevent a clean lift, also, make sure that all personnel are well away from the area,... -
Page 8: Maintenance
Store in a dry place, with the ram fully retracted. If stored for long periods, inspect at least once a year, clean and re-oil. For servicing, contact your CLARKE dealer, or CLARKE International Service Department. CHANGING THE OIL 1. Lower the saddle as far as possible 2. -
Page 9: Troubleshooting
If any of these remedies fail to restore your jack, consult your Clarke dealer For Spare Parts and Servicing, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400... -
Page 10: Exploded Diagram And Parts List
EXPLODED DIAGRAM AND PARTS LIST DESCRIPTION PART NO Ram Assembly CTJ5GLB01 Front Wheel Assembly CTJ5GLB02 Rear Castor Assembly CTJ5GLB03 Saddle CTJ5GLB04 Rubber Pad CTJ5GLB05 Foot Pedal CTJ5GLB06 Extension Spring CTJ5GLB07 Handle Assembly CTJ5GLB08 Release Knob CTJ5GLB09 Universal Joint Assembly CTJ5GLB10 Pump Piston Assembly CTJ5GLB11 Filler Plug... -
Page 11: Declaration Of Conformity
DECLARATION OF CONFORMITY...