Ec Declaration Of Incorporation - Emerson Vilter VSS Installation, Operation & Maintenance Manual

We hereby declare that the following machinery is intended to be incorporated into other machinery, and must
not be put into service until the relevant machinery into which it is to be incorporated has been declared in con-
formity with the essential requirements of the Machinery Directive 2006/42/EC.
Machine Description:
Make:
Type:
Model Size:
Manufactured by:
The following transposed harmonised European Standards have been used:
EN ISO 12100-1:
2010
EN ISO 13857:
2008
EN349: 1993 + A1:
2008
EN ISO 13850:
2015
IEC/EN60204-1 (2016) - Safety of Machinery - Electrical equipment of machines - Specification for general
A technical construction file for this machinery is retained at the following address:
Vilter Manufacturing, LLC.
5555 South Packard Avenue
P.O. Box 8904, Cudahy
Wisconsin 53110-8904
Signed for and on behalf of Vilter Manufacturing, LLC.:
5555 South Packard Avenue
iv

EC Declaration of Incorporation

Industrial Compressor
Vilter
VSM / VSS / VSH / VSSH / VSG & VSSG Single Screw Compressor
97, 113, 127, 128, 145, 160, 180, 204, 222, 243, 152, 182, 202, 301, 361, 401, 501, 601,
701, 291, 341, 451, 601, 751, 901, 791, 891, 1051, 1201, 1301, 1551, 1851, 2101, 2401,
2601, 2801, 3001
Vilter Manufacturing, LLC.
- Safety of Machinery - General principles for design-Risk assessment and risk reduction.
- Safety of Machinery - Safety distances to prevent danger zones being reached by the
upper and lower limbs.
- Safety of Machinery - Minimum gaps to avoid crushing hazards.
- Safety of Machinery - Emergency stop equipment - Principles for design.
requirements
Vilter Manufacturing, LLC.
t P.O. Box 8904
001-414- 744-0111
VSS/VSM/VSH/VSSH • Installation, Operation and Maintenance Manual • Emerson • 35391SD
Last update: May 2019
t Cudahy, Wisconsin 53110-8904
t FAX: 001-414-744-3483