Important Message - Emerson Vilter VSS Installation, Operation & Maintenance Manual

Important Message

READ CAREFULLY BEFORE INSTALLING AND STARTING YOUR COMPRESSOR.
The following instructions have been prepared to assist in installation, operation and removal of Vilter Single Screw
TM
Compressors. Following these instructions will result in a long life of the compressor with satisfactory operation.
The entire manual should be reviewed before attempting to install, operate, service or repair the compressor.
Only qualified personnel shall operate, install and maintain the equipment.
Qualified personnel shall be accredited by a local regulatory agency, which requires that they are continually scruti-
nized by an organization whose sole mission is to establish, maintain and assure that the highest industry standards
are set and met in a continuous and ongoing basis. The credentials shall address topics ranging from plant safety,
operating concepts and principles and operations through the basics of refrigeration compliance and PSM (Process
Safety Management) requirements.
Follow local workplace occupational safety and health regulations.
A compressor is a positive displacement machine. It is designed to compress gas. The compressor must not
be subjected to liquid carry over. Care must be exercised in properly designing and maintaining the system to
prevent conditions that could lead to liquid carry over. Vilter Manufacturing is not responsible for the system
or the controls needed to prevent liquid carry over and as such Vilter Manufacturing cannot warrant equipment
damaged by improperly protected or operating systems.
Vilter screw compressor components are thoroughly inspected at the factory. However, damage can occur
TM
in shipment. For this reason, the equipment should be thoroughly inspected upon arrival. Any damage noted
should be reported immediately to the Transportation Company. This way, an authorized agent can examine
the unit, determine the extent of damage and take necessary steps to rectify the claim with no serious or costly
delays. At the same time, the local Vilter representative or the home office should be notified of any claim made.
All inquires should include the Vilter sales order number, compressor serial and model number. These can be found
TM
on the compressor name plate on the compressor.
All requests for information, services or parts should be directed to:
Vilter Manufacturing LLC
Customer Service Department
5555 South Packard Ave
Cudahy, WI 53110 USA
Telephone: 1-414-744-011; Fax:1-414-744-3483
E-mail: info.vilter@emerson.com; Web: Emerson.com/Vilter
Equipment Identification Numbers:
Vilter Order Number: _______________________Compressor Serial Number: _________________
Vilter Order Number: _______________________Compressor Serial Number: _________________
iii
VSS/VSM/VSH/VSSH • Installation, Operation and Maintenance Manual • Emerson • 35391SD