Recommended Distribution Plate Configurations; 7-Slot Configuration - EK-Quantum Reflection PC-O11D Mini D5 PWM D-RGB User Manual

RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS

RADIATOR 1
Up to SE360 (bottom)
It is mandatory to use at least one of each type of port and all
remaining ports should be sealed using the supplied plugs. The
EK-Loop Multi Allen Key (6mm, 8mm, 9mm) may be used to install
all EK fittings, do not use excessive force.
RADIATOR 2 OUT
If one of the prescribed components will not be installed (ie.
bottom radiator or GPU block) then one IN and one OUT port
RADIATOR 2 IN
must still be joined together in order for this distribution plate
to function!
Installing this distro plate in the front of the case allows two
CPU OUT/IN
radiator configurations based on your motherboard form factor.

7-SLOT CONFIGURATION

GPU IN/OUT (SLOT 1)
ITX / mATX / ATX
GPU IN/OUT (SLOT 2)
GPU IN/OUT (SLOT 3)
GPU IN (SLOT2)
RADIATOR 1 OUT
DRAIN
RADIATOR 1 IN
- 9 -