Fine-Tuning Your Vtx-7 - Kreepy krauly VTX-7 Owner's Manual

Fine-tuning your VTX-7

Depending on your pool's shape and surface, you may need to make some
small tweaks to optimise the performance of your VTX-7.
How to achieve the right incline
VTX-7 works best when the main body sits at a 45° incline to the pool surface.
If your cleaner is lifting (greater than 45°), move the second hose weight
towards the swivel head assembly. To test if it is sitting correctly turn off
the pump, tow the VTX-7 into 1.2 metres of water and observe how it sits
when it settles to the bottom. Adjust the second weight further if needed.
more than 45°
If your cleaner is sitting lower than 45° , move the second hose weight away
from the swivel head assembly. If it still won't sit correctly, remove the first
hose weight or call your pool shop or our Customer Service Centre for advice.
less than 45°
11
SOC33548 VTX-7 instructions_Art4.indd 11 29/09/2015 2:56 pm