Rigging Procedures; General Principles - L-Acoustics K3i Owner's Manual

Rigging procedures

General principles

This introduction provides general principles applicable for all congurations.
Screws
Rigging screws
Only use the rigging screws provided by L-Acoustics.
Do not use the placeholder screws for rigging.
Always remove the relevant placeholder screws before securing the rigging plates.
C
B
A
Risk of acoustic leaks
Do not remove the placeholder screws from the bottom rear inserts (A, B or C) that are not used.
rigging accessory
K3i-LINK (connecting from an
enclosure below) / KARAIIi-
DOWNK3i
K3i-RIGBAR
K3i-TILTBRACKET
It is recommended to use the rigging report from Soundvision to prepare the enclosures.
K3i owner's manual (EN) version 1.0
inter-element angles
0.25°, 3°
2°, 5°, 10°
1°, 4°, 7.5°
—
5°, 2.5°, 0°, -2.5°, -5°, -7.5°, -10°, -12.5°, -15°
C
B
A
Rigging procedures
used insert
C
B
A
B
A
37