Tools - L-Acoustics K3i Owner's Manual

Tightening screws
Driving screws
Do not fully tighten the screws unless otherwise instructed.
Follow the indicated torque when tightening a screw.
When securing a rigging plate to an enclosure, secure the top and middle screws on both sides. Secure the bottom
screws only when instructed to.
Apply a torque of 7 N.m.
Stacking enclosures
Fastening brackets
Always secure a stacked array to the ground using K3i-TILTBRACKET to ensure the stability of the array.
When stacking two enclosures, the top enclosure must be slightly lifted to align the inserts with the rigging plate holes.
Use an accessory like a wedge or a lever to adjust the height of the enclosure. Be careful not to scratch the paint.

Tools

Before rigging this product, make sure all the tools listed are available. References are given for FACOM
table. Other manufacturers can be used.
name
Set of 6-point 1/4" sockets
electric screwdriver with torque
selector
K3i owner's manual (EN) version 1.0
reference
RL.NANO1 / R.360NANO
-
Rigging procedures
®
products in this
distributor
FACOM
-
39