L-Acoustics K3i Owner's Manual page 56

Rigging procedures
b) Secure the enclosure to the long bracket. Select the appropriate angle.
5. Depending on the selected deployment, add more K3i enclosures, one at a time:
a) On the additional enclosure, remove the relevant placeholder screws, refer to step
b) Secure the top and middle screws of K3i-LINK on both sides.
T40
x8
c) Lift the enclosure under the array and tighten the screws.
Select the appropriate holes and inserts depending on the selected angle.
d) Tighten all the screws on the supporting enclosure.
Apply a torque of 7 N.m.
56
2 (p.54).
C
A B
1°
4°
7.5°
K3i owner's manual (EN) version 1.0
0.25°
3°
2°
5°
10°