L-Acoustics K3i Owner's Manual page 38

Rigging procedures
Rigging plate positions
K3i-LINK and K3i-ENDLINK left and right rigging plates are different. Use the visual cues to differentiate them:
• Place the rigging plate side with the label towards the enclosure.
• At the top of K3i-LINK rear: the bottom hole on the linking section is positioned towards the rear of the enclosure.
• At the bottom: the shape of the rigging plate is parallel to the edge of the enclosure and the holes and inserts are
aligned.
Always secure K3i-LINK with the linking section upwards.
Do not confuse the angle accessories of K3i-TILTBRACKET and K3i-CEILINGBRACKET. The K3i-TILTBRACKET angle
accessory is wider and smaller than the K3i-CEILINGBRACKET angle accessory.
K3i-TILTBRACKET
38
K3i-CEILINGBRACKET
K3i owner's manual (EN) version 1.0