L-Acoustics K3i Owner's Manual page 54

Rigging procedures
Procedure
1. Secure K3i-CEILINGBRACKET to the ceiling using four M10 screws and fasteners.
Fasteners for ceiling-mounting.
Select screw length and anchors applicable to the ceiling properties.
Model the array in Soundvision and check the loads on rigging in the Mechanics view.
The ceiling holes are the centered hole (on the shorter side).
2. On the rst enclosure, remove the relevant placeholder screws on both sides.
C
B
A
Risk of acoustic leaks
Do not remove the placeholder screws from the bottom rear inserts (A, B or C) that are not used.
rigging accessory
K3i-LINK (connecting from an
enclosure below) / KARAIIi-
DOWNK3i
K3i-RIGBAR
K3i-TILTBRACKET
It is recommended to use the rigging report from Soundvision to prepare the enclosures.
54
984 mm / 38.7 in
inter-element angles
0.25°, 3°
2°, 5°, 10°
1°, 4°, 7.5°
—
5°, 2.5°, 0°, -2.5°, -5°, -7.5°, -10°, -12.5°, -15°
C
B
A
K3i owner's manual (EN) version 1.0
Ø11.5 mm / 0.43 in
used insert
C
B
A
B
A