L-Acoustics K3i Owner's Manual page 18

Rigging system description
K3i features on each side:
Eight M8 inserts for own congurations
with a rigging frame or stacked congurations.
All inserts are tted with placeholder screws. Leave the placeholder screws in the inserts that are not used.
The three inserts at the bottom rear on each side are used depending on the rigging accessory secured under the
enclosure, and on the inter-element angle.
C
B
A
Risk of acoustic leaks
Do not remove the placeholder screws from the bottom rear inserts (A, B or C) that are not used.
rigging accessory
K3i-LINK (connecting from an
enclosure below) / KARAIIi-
DOWNK3i
K3i-RIGBAR
K3i-TILTBRACKET
It is recommended to use the rigging report from Soundvision to prepare the enclosures.
Rigging screws
Only use the rigging screws provided by L-Acoustics.
Do not use the placeholder screws for rigging.
Always put the placeholder screws back in place to avoid leaks.
18
inter-element angles
0.25°, 3°
2°, 5°, 10°
1°, 4°, 7.5°
—
5°, 2.5°, 0°, -2.5°, -5°, -7.5°, -10°, -12.5°, -15°
Two M6 inserts for securing a screen.
C
B
A
K3i owner's manual (EN) version 1.0
used insert
C
B
A
B
A