Nord Drivesystems NORDAC FLEX SK 200E Series Brief Instructions page 78

NORDAC FLEX (SK 200E ... SK 235E) – Brief instructions for Frequency Inverters
Diagnostic LEDs
LED
Name Color Description
DOUT 1 yellow Digital output 1
DIN 1 yellow Digital input 1
DIN 2 yellow Digital input 2
DIN 3 yellow Digital input 3
DIN 4 yellow Digital input 4
TEMP yellow Motor PTC
thermistor
CHOP yellow Brake chopper
BRAKE yellow Mech. Brake
DOUT 2 yellow Digital output 2
BUS-S green System bus
Status
BUS-E red System bus
Error
Pos : 654 /Allgem ein/Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0.doc x @ 2265496 @ @ 1
78
Signal
Status
on High signal applied
on High signal applied
on High signal applied
on High signal applied
on High signal applied
on Motor overtemperature
on Brake chopper active, brightness → degree of load (only
SK 2x5E)
on Mech. Brake released
on High signal present (only SK 2x0E)
off No process data communication
Flashing "BUS Warning"
(4 Hz)
On Process data communication active
 Receipt of at least 1 telegram/s
 SDO data transfer is not indicated
off No error
Flashing Monitoring error P120 or P513
(4 Hz)
 E10.0/E10.9
Flashing Error in an external system bus module
(1 Hz)
Bus module Timeout on external BUS (E10.2)
 System bus module has module error (E10.3)
on System bus in state "BUS off"
Meaning
BU 0240 en-US-4920