Download Print this page

WilTec 62422 Operation Manual page 3

Polishing machine

Advertisement

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Warning!
Make sure to carefully read this instruction manual and to abide by the following rules and
regulations in order to prevent accidents such as electric shocks, fire, and injuries.
Further ensure to keep this instruction manual and to have it available at all times.
Safety precautions
Workplace safety
Keep your work area clean and well lit. Untidy and poorly lit work areas increase the risk of
accidents.
Never operate electrical devices in an explosive environment, e. g. near flammable li-
quids, gases, or dust. Electrical devices can cause sparks that can ignite these substances.
Keep bystanders and children away while you are using the electrical device. Distrac-
tions can cause you to lose control of the device.
Electric safety
Before connecting the device, make sure that the voltage of the power source corres-
ponds to the voltage specified on the type plate.
Avoid body contact with earthed surfaces, e. g. pipes, heaters, stoves, or refrigerators.
There is an increased risk of electric shock if the body is grounded. If you work in a humid en-
vironment, it is essential to use a residual current device to provide power to your electrical
device. Wearing rubber gloves for electricians and shoes with rubber soles also increases
safety.
Never expose electrical devices to rain or moisture. Water penetrating into an electrical
device increases the risk of electric shock.
Handle the power cord carefully. Never carry devices by the power cord or pull the power
plug out of the socket with the help of the cable. Keep the power cord away from heat, oil,
sharp objects, or moving parts. Replace a damaged power cord immediately. Defective power
cords increase the risk of electric shock.
If you want to operate an electrical device outdoors, always use an extension cable that
is suitable for outdoor use. Outdoor extension cords reduce the risk of electric shock.
Personal safety
Stay vigilant and pay full attention to what you are doing while operating an electrical
appliance. Do not use the device when you are tired or under the influence of alcohol,
drugs or medicine. A moment of inattention while using the electrical device can result in ser-
ious injury.
Wear appropriate clothing. Do not wear loose clothing or jewellery. Tie long hair se-
curely together. Keep hair, clothing and gloves away from moving parts. Loose clothing,
jewellery, or long hair can get caught in moving parts. Keep the handles dry, clean, and free
from oil and lubricants.
Avoid unintentional starting. When connecting, make sure that the switch is in the off
position. When carrying electrical devices, do not put your finger on the trigger and do not
connect devices with the switch to the on position to the mains.
Remove all wrenches before switching on the device. An adjustment wrench or wrench
that is still attached to a moving part can cause injury.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62422, 62426
Page 3
03
2021-1

Advertisement

loading

This manual is also suitable for:

62426