GiBiDi PASS 3 Instructions For Installation Manual page 23

12 vdc gearmotor with a built-in “dg” electronic control unit

Hide thumbs Also See for PASS 3:

FUNCTION

MIN.÷MAX.

3.0

0 ÷ 2

3.1

0 ÷ 99

3.2

9.8

9.9

ERROR MESSAGES DISPLAYED

In case of an error during the test of the safety devices (therefore

device faulty), the display will indicate which device has failed the

test.

E1 = Torque regulator

E2 = Internal photocell

E3 = External photocell

E4 = Opening frame

PROGRAMMING OF KEY 1 OF THE TRANSMITTER

0 = Performs the same functions as the start button (terminals 8-6).

1 = Performs the same functions as the pedestrian gate button (terminals 9-6).

2 = Performs the same functions as the closing button (terminals 7-6).

DELETING TRANSMITTER CODES

Selecting and entering this program, the first memory allocation containing a code is

displayed. With the increase button P1 the desired memory allocation may be selected and

the transmitter code contained in it deleted by pressing the button P2.

TRANSMITTER CODE STORAGE

Selecting and entering this program, the first free memory allocation is displayed. To store

the transmitter code, select the desired memory allocation with the button P1, press any key

of the transmitter and then press the button P2.

TEST PROGRAM

When selecting and confirming this program, all the data useful for functional testing of the

equipment will be stored, therefore all the safety devices will be active with program (1).

DEFAULT PROGRAM (BASIC)

When selecting and confirming this program, all the data present in the DEFAULT box will be

stored.

DESCRIPTION

DEFAULT