Advertisement
> Use Interlock Signmaker's Templates ONLY with a
plunge router outfitted with a baseplate that can accept
the included center guide bushing and retaining ring. Use
of the templates with a fixed-base router is likely to result
in damage to the templates and workpiece, as well as
possible injury.
> Always use the recommended size of router bit and guide
bushing for your template set. Failure to do so could result
in damage to the templates and workpiece, as well as
possible injury.
PRODUCT SPECIFIC SAFETY WARNINGS
> To avoid serious injury, keep hands and fingers away from spinning router bit. Maintain
awareness of the bit at all times.
> Always secure the templates to your workpiece and your
workpiece to the work surface. Failure to do so could
result in damage to the templates and workpiece, as
well as possible injury.
> Always allow the plunge mechanism on your router to
fully retract the bit at the completion of a letter before
moving the router to the template of the next letter.
Failure to do so could result in damage to the template.
3
Advertisement
Need help?
Do you have a question about the Interlock Signmaker's Script Font Template and is the answer not in the manual?
Questions and answers
why is the wizard script font generator not working you put your word in and it does nothing
The Rockler Interlock Signmaker's Script Font Template may not be working when entering a word due to several possible reasons:
1. Incorrect Template Order – The templates must be arranged correctly, ensuring proper interlocking between letters. If they are not aligned as instructed, the word may not form correctly.
2. Wrong Spacers Used – Some letters require specific spacers (e.g., LN3 Mid Spacer) to maintain proper letter spacing. Using incorrect spacers can cause misalignment.
3. Improper Router or Bit Use – The template must be used with a plunge router and the specified guide bushing and bit. Using a fixed-base router or incorrect bit size can damage the template and workpiece.
4. Templates Not Secured – If the templates or workpiece are not properly secured to the work surface, they can shift during routing, leading to errors.
5. Not Following Step-by-Step Process – Each letter may require multiple passes with different templates (e.g., R-1 and R-2 for "r"). Skipping steps or using the wrong sequence can result in incomplete or incorrect letters.
Checking these factors should help resolve the issue.
This answer is automatically generated