Rockler 59133 Assembly Instructions

Complete basic router table kit

Congratulations on the purchase of your new Complete Basic Router Table Kit! It contains all the hardware

needed to assemble this full-size, full-featured router table. To make the assembly process easier to

understand and more enjoyable, please read the instructions fully before starting.

Complete Basic Router Table

Kit Assembly Instructions

Table of Contents

Need help?

Do you have a question about the 59133 and is the answer not in the manual?

Page 1 Complete Basic Router Table Kit Assembly Instructions Congratulations on the purchase of your new Complete Basic Router Table Kit! It contains all the hardware needed to assemble this full-size, full-featured router table. To make the assembly process easier to understand and more enjoyable, please read the instructions fully before starting.
Page 2 PARTS LIST - BASIC ROUTER TABLE Quantity Quantity ⁄ " x 23 ⁄ " x 1" Tabletop Adjustable MDF Fence Faces ⁄ " x 11 ⁄ " Phenolic Plate Bit Safety Guard 10 5/16"-18 T-Knobs Plate Insert 11 5/16"-18 x 1 Starter Pin ⁄...
Page 3 Assemble the Fence 1. Insert 5/16"-18 x 1 ⁄ " T-Bolts (11) through the holes in the face of the Aluminum Fence Bracket (7) and thread a 1" Round Knob (12) on the end of each. 2. Slide the Adjustable MDF Fence Faces (8) so that the heads of the 5/16"-18 x 1 ⁄...
Page 4 3. Mark the locations of the mounting holes. Remove until the plate is flush with the table. the stand. Check Rockler.com for updates. If you have further questions, please 4. Drill 1/8" pilot holes at those locations, taking care not contact our Technical Support Department at 1-800-260-9663 to drill all the way through the table.