Rockler JIG IT Instructions

Hinge mortising system

With templates for specific quadrant and side-rail hinges, bits and guide bushings (all sold separately)

the JIG IT Hinge Mortising System allows you to use your plunge router to easily cut precise mortises

for jewelry boxes, humidors and other small boxes. For safe and effective operation, please read these

instructions fully before use.

JIG IT

Hinge Mortising

System Instructions

Table of Contents

Need help?

Do you have a question about the JIG IT and is the answer not in the manual?

Page 1 With templates for specific quadrant and side-rail hinges, bits and guide bushings (all sold separately) the JIG IT Hinge Mortising System allows you to use your plunge router to easily cut precise mortises for jewelry boxes, humidors and other small boxes. For safe and effective operation, please read these...
Page 2 Etched line PARTS LIST - DRILL PRESS FENCE Quantity 1 Jig Base 2 Fence 3 Front Spacer 4 Optional Rear Spacer 5 8-32 Flat Head Socket Cap Screws 6 4mm Flat Washers 7 8-32 Socket Head Cap Screws...
Page 3 Align “A” letters Jig Use Detailed instructions for individual Templates are available at Rockler.com 1. Choose the appropriate Template (sold separately) for the hinge you are installing and insert it in the opening in the Jig Base, making sure to align the letter “A” on the Template with the “A”...
Page 4 2. Before using the Rockler Hinge Mortising Jig It read, understand 9. Dress appropriately and remove all jewelry, secure loose and follow all instructions and safety information provided.