Advertisement
Quick Links
Interlock Signmaker's Script Font Template Instructions
Effective December 2020
Review full instructions prior to use for important safety information.
Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rockler Interlock Signmaker's Script Font Template
Summary of Contents for Rockler Interlock Signmaker's Script Font Template
- Page 1 Interlock Signmaker’s Script Font Template Instructions Effective December 2020 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
-
Page 2: General Safety Warnings
Instructions and safety warnings for your product (see the • Keep children and bystanders away from the tool Instructions link on the product page at Rockler.com). operating area; • Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;... - Page 3 PRODUCT SPECIFIC SAFETY WARNINGS > To avoid serious injury, keep hands and fingers away from spinning router bit. Maintain awareness of the bit at all times. > Use Interlock Signmaker’s Templates ONLY with a > Always secure the templates to your workpiece and your plunge router outfitted with a baseplate that can accept workpiece to the work surface.
-
Page 4: System Explanation
• Word Anchors are used to bookend and lock the templates We strongly encourage you to use the in place to maintain correct letter positioning when switching free online wizard at Interlocksign.rockler.com to generate a out templates. custom routing plan for your sign, including a visual guide to the sequence of templates needed. - Page 5 Fig. 2 Choose the correct Word Spacer by laying out the words and To make it as easy as possible to plan your sign, Rockler looking at the connection points at the end of the first word and has created a free online Signmaking Wizard. Just go to at the beginning of the next word.
- Page 6 THESE WARNINGS PERTAIN Template placed Previously placed template TO THE REST OF THE STEPS in this pass IN THIS BOOK: > To avoid serious injury, keep hands and fingers away from spinning router bit. Maintain awareness of the bit at all times.
- Page 7 Pass 1 Pass 1 Does not interlock Pass 2 Pass 2 Pass 3 Pass 3 Final Look Final Look Fig. 3 Fig. 4...
- Page 8 Because the “t” appears in the middle of the word and because the crossmember template must attach to a spacer template, you may need to replace templates for the rest of the word Crossmember template replaces the letter before the “t” and the “t” spacer Fig.
- Page 9 Pass 1 Pass 2 Pass 3 Pass 4 Pass 5 Final Look Fig. 6...
- Page 10 T-2 template. Pass 3: Replace the Mid Spacers for the letters not routed in Check Rockler.com for updates. If you have further questions, please Passes 1 and 2 with the templates for the letters, starting with the contact our Technical Support Department at 1-800-260-9663 first template for any two-template letters.
- Page 11 Pass 1 Pass 2 Pass 3 Pass 4 Pass 5 Pass 6 Final Look Fig. 8...
- Page 12 57792 64759 Distributed by Rockler Companies, Inc. 1-800-279-4441 Rev 12/20 4365 Willow Dr. Medina, MN 55340 www.rockler.com...
Need help?
Do you have a question about the Interlock Signmaker's Script Font Template and is the answer not in the manual?
Questions and answers
why is the wizard script font generator not working you put your word in and it does nothing
The Rockler Interlock Signmaker's Script Font Template may not be working when entering a word due to several possible reasons:
1. Incorrect Template Order – The templates must be arranged correctly, ensuring proper interlocking between letters. If they are not aligned as instructed, the word may not form correctly.
2. Wrong Spacers Used – Some letters require specific spacers (e.g., LN3 Mid Spacer) to maintain proper letter spacing. Using incorrect spacers can cause misalignment.
3. Improper Router or Bit Use – The template must be used with a plunge router and the specified guide bushing and bit. Using a fixed-base router or incorrect bit size can damage the template and workpiece.
4. Templates Not Secured – If the templates or workpiece are not properly secured to the work surface, they can shift during routing, leading to errors.
5. Not Following Step-by-Step Process – Each letter may require multiple passes with different templates (e.g., R-1 and R-2 for "r"). Skipping steps or using the wrong sequence can result in incomplete or incorrect letters.
Checking these factors should help resolve the issue.
This answer is automatically generated