Engine Start - Hisun HS1P65MM Operator's Manual

① Cargo brace rod turning point(spray type grease )
② Cargo bed rotating axle (spray type grease)
① Gear shift lever pivot (spray type grease )
Periodic Service
■ Checking engine start system
TO avoid personal injury


◆ Preparation before testing
1.
2.
◆ Test gear shift range lever safety switch
1.
2.
3.
4.
5.
① Gear shift lever
10-8
CAUTION
Do not allow anyone near the vehicle
while testing.
If the vehicle does not pass the test, do
not operate the vehicle.
Place all control levers in the "NEUTRAL"
position.
Set the parking brake and stop the
engine.
Sit on the operator's seat.
Shift the gear shift range lever to: "L", "H",
"N" or REVERSE position.
Turn the key to "START" position.
The engine must not crank.
If it cranks consult your local dealer for
this service.