Manitou MC 18-2 D K ST3A S1 Operator's Manual page 84

2000H - PERIODIC MAINTENANCE - EVERY 2000 HOURS OF SERVICE OR 4 YEARS
CHECK
- Check the condition of the tyres, to detect cuts, blisters, wear, etc.
- Check the tightening torque of the wheel nuts with a torque wrench.
• Front wheels: 550 N.m ± 55 N.m
• Rear wheels: 110 N.m ± 16 N.m
• Rear wheels: 200 N.m ± 20 N.m
REPLACE
The safety cartridge replacement frequency is given for information only.
It must be changed every second time the dry air filter cartridge is changed.
- For the disassembly of the dry air filter cartridge (
filter cartridge).
- Carefully remove the dry air filter safety cartridge 1, taking care to avoid spilling
the dust.
- Clean the gasket surface of the safety cartridge with a clean, damp, lint-free cloth.
- Check the condition of the new safety cartridge (
- Introduce the safety cartridge into the filter axis, pressing on the edges and not
the middle.
- For the reassembly of the dry air filter cartridge (
cartridge).
REPLACE
These operations are to be carried out as necessary or every two years at the beginning
of winter.
The engine does not contain any corrosion resistor and must be filled during the whole year with a mixture containing
- Place the lift truck on level ground with the engine stopped and cold.
- Open the engine cover (
INSTRUMENTS).
- Remove the cover plate 1.
ALSO PERFORM THE 500 HOUR AND 1000 HOUR PERIODIC MAINTENANCE OPERATIONS.
MC18-2
MC18-4
IMPORTANT
IMPORTANT
25 % of ethylene glycol-based antifreeze.
2 - DESCRIPTION: CONTROL AND COMMAND
Wheel nut tightening torques
Dry air filter safety cartridge
1000H: REPLACE Dry air
FILTERS AND BELTS).
1000H: REPLACE Dry air filter
Coolant
3 - 28
www.duma-rent.com
1
1