Connection To The Drain Line; Operative Temperature Adjustment - Bartscher DS 901 Use And Maintenance Manual

GB
Hardness
Residual
Minerals
USE AND MAINTENANCE MANUAL
Specification
French degrees
German degrees
English degrees
Parts per million
Maximum
2.4
The tank empties by gravity, so the drain needs to be
situated below the base of the machine.
The drain pipe needs to be connected to a drain- trap built
into the floor.
The drain dimensions are shown in the installation drawing.
2.5

OPERATIVE TEMPERATURE ADJUSTMENT

It is possible to adjust the boiler water heating temperature (rinse
water) and/or the washing tank temperature.
Set boiler rinse water:
Switch on the machine, hold line push-button on/off "A" pressed for a
few seconds until wording "b " " 78 °C" is displayed. Press G and L
push-buttons to increase or decrease the setting.
From
5
f
°dH 4
5
°e
70
ppm
mg/l

CONNECTION TO THE DRAIN LINE

Pag. 5
To
10
7'5
9,5
140
300/400