Table of Contents
Advertisement
Simrad ES38-18/200–18C Installation manual
Installing the transducer cable
When the transducer has been placed under the mounting location, the cable can be pulled
through the cable gland and stuffing tube, and then through the steel conduit up to the
transceiver.
Prerequisites
• The physical location of the transducer has been defined.
• The steel conduit has been installed.
• The stuffing tube has been installed.
• All relevant personnel (skilled shipyard workers, ship electricians) and their tools must
be available.
The following special tools are required for cable installation:
• Fish tape (wire pulling tool) with suitable length.
• Electrician's tape.
Context
The transducer cable is provided with fixed length 20 meters. The stuffing tube and cable
gland are included in the delivery.
Note
All necessary precautions must be made to avoid damage to the cable while pulling it
through the steel conduit.
These items are all provided as a part of the transducer delivery.
Stuffing tube, penetrates the hull plating
A
Washer
B
24
404776/A
Advertisement
Table of Contents
