Advertisement
WOODLAND
SCENICS
Please follow the River Pass General Instructions which are enclosed in this kit. You will be referred to the
drawings and notes printed here. Please read through all instructions before beginning to build your kit.
Chimney
Lightly sand bottom of chimney, retaining angle so that chimney sits straight when glued to roof. Glue
to roof after roof installation.
Doors and Windows
Remove doors and windows from sprue. Paint them as desired (following General Instructions). Cut
clear window material to cover backs of window frames. Glue to window frames taking care that glue
does not squeeze onto clear material where visible. "Flash" occurring inside of openings may have
to be removed by scraping lightly with a hobby knife (X-Acto) to ensure a proper fit. Glue door and
window assemblies in place.
Roof
To assemble gable roof, see enclosed # 201 Roof Assembly Instructions.
RP13-4
(sand both edges)
RP13-1
®
#RP13
Dyden #1
RP13-3
RP13-2
(sand both edges)
Advertisement
